KFD2-SL2-Ex2 Pepperl+Fuchs Solenoid Driver
$202.00
- Part Number: KFD2-SL2-Ex2
- Manufacturer:بيبرل+فوكس
- Availability: in stock
- Estimated Lead Time: Usually Ships in 1-5 Working Days
- Condition: Brand New
- Warranty :12 months
الوصف
Solenoid Driver KFD2-SL2-Ex2
- 2-channel isolated barrier
- 24 V DC supply (Power Rail)
- Output 45 mA at 11.7 V DC
- Logic input, non-polarized
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
| General specifications | ||
|---|---|---|
| Signal type | Digital Output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | Power Rail or terminals 14+, 15- | |
| Rated voltage | 20 … 30 V DC | |
| Power consumption | max. 3.3 W at 45 mA output current | |
| Input | ||
| Connection side | control side | |
| Connection | terminals 7, 8, 9 | |
| Input current | approx. 3 mA at 24 V DC | |
| Signal level | 1-signal: 16 … 30 V DC 0-signal: 0 … 5 V DC |
|
| Output | ||
| Connection side | field side | |
| Connection | channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6- |
|
| Internal resistor | 272 Ω | |
| Current | ≤ 45 mA | |
| Voltage | ≥ 11.7 V | |
| Open loop voltage | min. 24 V | |
| Output signal | These values are valid for the rated operating voltages from 20 … 30 V DC. | |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms | |
| Line fault detection | signal at short-circuit RB < 50 Ω, lead breakage RB > 10 kΩ , test current < 650 µA | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Control elements | DIP-switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 … 50 °C (-4 … 122 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | ZELM 00 ATEX 0024 | |
| Marking | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
|
| Certificate | TÜV 02 ATEX 1820 X | |
| Marking | II 3G Ex nA IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-26:2007 , EN 50303:2000 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 116-0304 | |
| IECEx approval | IECEx TUN 04.0001 | |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | |
| Related Models: | |
| KCD2-SOT-Ex1.LB | KCD2-SR-Ex1.LB-AB |
| KFD2-ER-1.W.LB | KFD0-TT-1 |
| KFD2-ER-2.W.LB | KFD2-UT2-1-1 |
| KFD2-SR3-2.2S | KFD2-UT2-2-1 |
| KFU8-SR-1.3L.V | KCD2-SCS-2 |
| KCD2-SOT-1.LB.SP | KFD0-CS-1.50 |
| KCD2-SOT-2.SP | KFD0-SCS-1.55 |
| KCD2-SR-2.SP | KFD0-CS-2.50 |
| KCD2-ST-1.LB.SP | KCD2-SCS-2.SP |
| KFD2-ER-1.6 | KFD0-CS-2.51P |
| KFD2-SR2-2.2S | KFD2-USC-1.D |
| KFD2-ER-1.5 | KCD2-UT2-1 |
| KFU8-DW-1.D | KFD0-CC-1 |
| KFD2-DWB-1.D | KFD0-TR-1 |
| KFD2-UFC-1.D | KFD2-GUT-1.D |
| KFU8-DWB-1.D | KFD2-UT2-1 |
| KFU8-UFC-1.D | KFD2-UT2-2 |
| KFU8-UFT-2.D | KFU8-GUT-1.D |
| KFD2-SR2-2.W.SM | KFU8-USC-1.D |
| KFD2-UFT-2.D | KFD2-WAC2-1.D |
| KFU8-UFC-1.D.FA | KFD2-STC5-1.2O |
| KFD0-RSH-1.4S.PS2 | KCD2-STC-1 |
| KFD2-RSH-1.2E.L2 | KCD2-STC-1.2O |
| KCD0-RSH-1.1D.1 | KFD2-CRG2-1.D |
| KCD0-RSH-1.1D.4 | KFD2-STC5-2 |
| KCD0-RSH-1.1E.1 | KFU8-CRG2-1.D |
| KFD0-RO-2 | KCD2-STC-1.SP |
| KFD0-RSH-1.1D.F1 | KFU8-VCR-1 |
| KFD0-RSH-1.1E.1 | KCD2-SCD-Ex1.ES |
| KFD2-RSH-1.2D.FL2 | KCD2-SCD-Ex1.ES.SP |
| KFD2-RSH-1.2D.FL3 | KCD2-SCD-Ex1 |
| KFD2-STC5-1 | KFD2-STC5-1.2O |
معلومات إضافية
مراجعات (0)
Shipping & Delivery
المراجعات
لا توجد مراجعات بعد.