NEN10-12GM50-E2-V1 Inductive sensor Pepperl+Fuchs Part number : 231723

• Manufacturer : Pepperl+Fuchs
• NEN10-12GM50-E2-V1
• Inductive sensor NEN10-12GM50-E2-V1
• Increased operating distance
• 10 mm non-flush
• Switching function : Normally open (NO)
• Output type : PNP
• Rated operating distance : 10 mm
• Installation : non-flush
• Output polarity : DC
• Assured operating distance : 0 … 8.1 mm
• Actuating element : mild steel, e. g. 1.0037, SR235JR (formerly St37-2)

  30 mm x 30 mm x 1 mm

• Reduction factor rAl : 0.45
• Reduction factor rCu : 0.4
• Reduction factor r304 : 0.75
• Reduction factor rBrass : 0.45
• Nominal ratings
• Installation conditions
• A : in steel 1.0037 (St37): 10 mm
• B : 16 mm
• C : 30 mm
• F : 42 mm
• Operating voltage : 10 … 30 V DC
• Switching frequency : 0 … 600 Hz
• Hysteresis : 0.06 … 1 mm
• Reverse polarity protection : yes
• Short-circuit protection : pulsing
• Overload resistance : yes
• Wire breakage protection : yes
• Surge suppression : yes
• Ripple : 10 %
• Voltage drop : ≤ 2 V
• Repeat accuracy : 0.3 mm
• Operating current : 0 … 200 mA , above 70°C max. 150 mA
• Off-state current : ≤ 10 μA
• No-load supply current : ≤ 15 mA
• Switching state indicator : LED, yellow
• Functional safety related parameters
• MTTFd : 1740 a
• Mission Time (TM) : 20 a
• Diagnostic Coverage (DC) : 0 %
• Approvals and certificates
• EAC conformity : TR CU 020/2011
• UL approval : cULus Listed, General Purpose
• CCC approval : CCC approval / marking not required for products rated ≤36 V
• Ambient conditions
• Ambient temperature : -25 … 85 °C (-13 … 185 °F)
• Storage temperature : -40 … 85 °C (-40 … 185 °F)
• Mechanical specifications
• Connection type : Connector M12 x 1 , 4-pin
• Housing material : brass, nickel-plated
• Sensing face : PBT
• Housing diameter : 12 mm
• Degree of protection : IP67
• Mass : 20 g
• Tightening torque, fastening screws : max. 10 Nm
• Shipping Weight : 1.5 Kg

NEN10-12GM50-E2-V1