KFD2-SL2-Ex2 Pepperl+Fuchs Solenoid Driver
$202.00
- Part Number: KFD2-SL2-Ex2
- Manufacturer:Pepperl+Fuchs
- Availability: in stock
- Estimated Lead Time: Usually Ships in 1-5 Working Days
- Condition: Brand New
- Warranty :12 months
Solenoid Driver KFD2-SL2-Ex2
- 2-channel isolated barrier
- 24 V DC supply (Power Rail)
- Output 45 mA at 11.7 V DC
- Logic input, non-polarized
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
| General specifications | ||
|---|---|---|
| Signal type | Digital Output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | Power Rail or terminals 14+, 15- | |
| Rated voltage | 20 … 30 V DC | |
| Power consumption | max. 3.3 W at 45 mA output current | |
| Input | ||
| Connection side | control side | |
| Connection | terminals 7, 8, 9 | |
| Input current | approx. 3 mA at 24 V DC | |
| Signal level | 1-signal: 16 … 30 V DC 0-signal: 0 … 5 V DC | |
| Output | ||
| Connection side | field side | |
| Connection | channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6- | |
| Internal resistor | 272 Ω | |
| Current | ≤ 45 mA | |
| Voltage | ≥ 11.7 V | |
| Open loop voltage | min. 24 V | |
| Output signal | These values are valid for the rated operating voltages from 20 … 30 V DC. | |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms | |
| Line fault detection | signal at short-circuit RB < 50 Ω, lead breakage RB > 10 kΩ , test current < 650 µA | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Control elements | DIP-switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 … 50 °C (-4 … 122 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | ZELM 00 ATEX 0024 | |
| Marking | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I | |
| Certificate | TÜV 02 ATEX 1820 X | |
| Marking | II 3G Ex nA IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-26:2007 , EN 50303:2000 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 116-0304 | |
| IECEx approval | IECEx TUN 04.0001 | |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | |
| Related Models: | |
| KCD2-SOT-Ex1.LB | KCD2-SR-Ex1.LB-AB |
| KFD2-ER-1.W.LB | KFD0-TT-1 |
| KFD2-ER-2.W.LB | KFD2-UT2-1-1 |
| KFD2-SR3-2.2S | KFD2-UT2-2-1 |
| KFU8-SR-1.3L.V | KCD2-SCS-2 |
| KCD2-SOT-1.LB.SP | KFD0-CS-1.50 |
| KCD2-SOT-2.SP | KFD0-SCS-1.55 |
| KCD2-SR-2.SP | KFD0-CS-2.50 |
| KCD2-ST-1.LB.SP | KCD2-SCS-2.SP |
| KFD2-ER-1.6 | KFD0-CS-2.51P |
| KFD2-SR2-2.2S | KFD2-USC-1.D |
| KFD2-ER-1.5 | KCD2-UT2-1 |
| KFU8-DW-1.D | KFD0-CC-1 |
| KFD2-DWB-1.D | KFD0-TR-1 |
| KFD2-UFC-1.D | KFD2-GUT-1.D |
| KFU8-DWB-1.D | KFD2-UT2-1 |
| KFU8-UFC-1.D | KFD2-UT2-2 |
| KFU8-UFT-2.D | KFU8-GUT-1.D |
| KFD2-SR2-2.W.SM | KFU8-USC-1.D |
| KFD2-UFT-2.D | KFD2-WAC2-1.D |
| KFU8-UFC-1.D.FA | KFD2-STC5-1.2O |
| KFD0-RSH-1.4S.PS2 | KCD2-STC-1 |
| KFD2-RSH-1.2E.L2 | KCD2-STC-1.2O |
| KCD0-RSH-1.1D.1 | KFD2-CRG2-1.D |
| KCD0-RSH-1.1D.4 | KFD2-STC5-2 |
| KCD0-RSH-1.1E.1 | KFU8-CRG2-1.D |
| KFD0-RO-2 | KCD2-STC-1.SP |
| KFD0-RSH-1.1D.F1 | KFU8-VCR-1 |
| KFD0-RSH-1.1E.1 | KCD2-SCD-Ex1.ES |
| KFD2-RSH-1.2D.FL2 | KCD2-SCD-Ex1.ES.SP |
| KFD2-RSH-1.2D.FL3 | KCD2-SCD-Ex1 |
| KFD2-STC5-1 | KFD2-STC5-1.2O |
| Gewicht | 1 kg |
|---|---|
| Größe | 20 × 15 × 15 cm |
Du musst angemeldet sein, um eine Bewertung abgeben zu können.
1.Delivery details: We will ship all items within 1-5 working days upon receipt of payment, our goal is: ship it as fast as we can.
2.We provide delivery worldwide using such shipping companies as:DHL, FEDEX, UPS, To USA, need 3-4 working days, To other countries, need 4-8 working days normally. But sometimes int'l delivery is highly depended on the courier company and local customs/duties.
3.Usually there will be a delay on the delivery update system; you may consider tracking your items in a few days time.
4.All the tracking number will be sent to your paypal email after the parcel sent, if you did not receive it after the time limit, just feel free to contact us.
5.Import duties and taxes are not included in the item price or shipping charges. These charges are the buyer responsibility.
Bewertungen
Es gibt noch keine Bewertungen.